Mouser: connect to the IoT faster with Microchip’s wireless modules
Mouser Electronics is now stocking the MRF24WN0MA and MRF24WN0MB wireless modules from Microchip. The low-power, 2.4 GHz, IEEE 802.11b/g/n-compliant transceiver modules interface with Microchip PIC32 microcontrollers and are supported by Microchip’s MPLAB Harmony integrated software framework with a TCP/IP stack. Both network-enabled modules can be quickly developed into almost any design, including Internet of Things applications.
The Microchip MRF24WN0MA and MRF24WN0MB wireless modules, available from Mouser Electronics, offer a range up to 300 meters with low current consumption that is specified at 64 mA (typical) in Receive (RX) mode and 246 mA at 18 dBm (typical) in Transmit (TX) mode. The devices provide associated radio frequency (RF) components, including a crystal oscillator, bypass and bias passives with integrated MAC, RF and power amplifiers, baseband, and built-in hardware support for encryption. The two modules differ only in the type of antenna required: The MRF24WN0MA module is approved for use with an integrated PCB trace antenna, whereas the MRF24WN0MB module includes an ultra-small W.FL coaxial connector and is approved for use with specific certified external antenna types.
The MRF24WN0MA and MRF24WN0MB wireless modules have received FCC and IC modular approval, and are also R&TTE Directive assessed radio modules for operation in Europe. The modular device tests can be applied toward final product certification and Declaration of Conformity. The modules are available in a 37-pin surface mount package that measures 17.8 × 26.7 × 2.2 mm. The castellated surface mount pads allow for easy and reliable PCB mounting, and both modules are ideal RF wireless solutions for low-power, low-data-rate Wi-Fi sensor networks, home automation, industrial controls, consumer electronics, remote device management, and medical and fitness applications.