Mouser: NXP LPC546xx 32-bit MCUs and development board now shipping

Mouser Electronics is now stocking LPC546xx 32-bit microcontrollers from NXP Semiconductors. These flexible and scalable devices dramatically improve dynamic power consumption and provide advanced peripherals that enable designers to create building control, communication, automotive infotainment and navigation, and Internet of Things applications.

The NXP LPC546xx-M4 microcontrollers, available from Mouser Electronics, are powered by a 180 MHz ARM Cortex-M4 core with up to 512 kBytes of on-chip flash and up to 200 kBytes of SRAM, plus a quad SPI Flash Interface for expanding program memory. The ARM core includes a floating point unit as well as a memory protection unit that separates the memory into distinct regions to improve the reliability of an embedded system.

The LPC546xx-M4 microcontrollers offer over 21 communication interfaces, including 10 Flexible Serial Interfaces, plus Ethernet support, a TFT LCD controller, and two CAN FD modules. The devices feature a programmable power management unit (PMU) that minimizes power consumption and matches power requirements at different performance levels. The devices feature low-power operation with active mode currents down to 3.3 mA and deep-sleep mode consumption as low as 22 µA.

Mouser is also stocking the LPCXpresso54608 development board. Designed for simple, rapid prototyping and evaluation, LPCXpresso development boards work with the LPCXpresso and MCUXpresso integrated development environments or industry-leading partner toolchains. The LPCXpresso54608 development board comprises the LPC54608 target device and a Link2 debug probe with CMSIS-DAP and SEGGER J-Link protocol options. The board also includes a PMod-compatible expansion port and a 10-pin SWD connector for use with third-party debug probes.

More Information...

Latest News from

Mouser: low-cost motor controller includes six-channel PWM module
Mouser: IoT modular platform for smart and connected cloud-based apps
Mouser: Bluetooth 5 MCU for IoT applications supports over-the-air updates
Mouser signs global agreement with D3 Semiconductor
Mouser: NXP LPC546xx 32-bit MCUs and development board now shipping
Mouser: nanoPower boost converter helps extend battery life
Mouser: single-ended low noise amplifiers for RF applications
Mouser stocking ultra-low-power MEMS oscillators from Microchip

Bs&T at PCIM2018

powerlosstester presenting BsT-pulse 3 phase version and BsT-SQ for powerloss measurement of inductive components new findings of tester, the highest Bs ferrite material D9B for SiC application GaN fe...


Würth and AnDAPT describe their new programmable power solution

In this video an engineer from AnDAPT describes their new programmable power solution and their partnership with Würth at the APEC exhibition  in San Antonio, Texas. Drawing from Würth&...


MAGMENT: Magnetizable concretes, sole enablers for dynamic inductive wireless charging.

MAGMENT is a patented material technology, engineered from cement and magnetic particles from recycled electronic waste. We are the inventors and sole company worldwide to offer both the concrete mate...


A look at Analog Devices' wireless power demonstration at APEC 2018

In this video Steve from Analog Devices walks us through a wireless power transmission demonstration at APEC 2018 in San Antonio, Texas. The LTC4120 is a constant-current/constant-voltage wireless rec...


Analog Devices talks about their Power over Ethernet solutions at APEC

In this video Analog Devices talks about their Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. Their LTC4291 provides four PSE Ports with two power channels per port, and is fully co...


Silicon Labs demonstrates their latest PoE solutions at APEC 2018

In this video John Wilson of Silicon Labs demonstrates their latest Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. The live demonstration shows how a remote device can effectively p...


Vitrek explains their advanced testing solutions at APEC 2018

In this video Vitrek explains their advanced testing solutions at APEC 2018 in San Antonio, Texas. The devices displayed includes their 4700 high-voltage meter, which can measure up to 10kV and can pe...


Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...



wholesale jerseys