Infineon: preventing cyber-attacks in rescue services

Electronic devices in emergency medicine are extremely powerful, but often insufficiently secured against unauthorized digital access. At the Digital Summit of the German Federal Government on 12 and 13 June 2017, three German companies will for the first time present a technical solution to secure medical devices against unauthorized access to their data.

Immediate emergency measures are often required at the scene of an accident. Respirators may be necessary as an initial intervention. These devices often remain with the patient—from the place of the accident through transport to the intensive care unit. Data is generated and required along the entire rescue chain, in order to provide the involved parties with necessary information as quickly as possible. Unauthorized access to that data can be prevented by mutual identification of the connected medical devices and computers, called machine-to-machine authentication. In addition, supply data can be encrypted before they are sent via mobile or stationary networks.

At the Digital Summit, visitors can see a mobile respirator from Fritz Stephan, protected by technology made in Germany by Wibu-Systems and Infineon Technologies. The integrated hardware anchor is certified by the Federal Office for Information Security (BSI). The respirator not only shows how critical medical devices can be effectively secured, but also how critical equipment can be retrofitted with hardware-based security to effectively secure personal data and medical records.

The device has recently been introduced to market, with security technology developed, tested, and produced in Germany. This is an important milestone towards digital sovereignty in medical care. In July 2016, the European Commission classified the health sector as a critical infrastructure requiring particular security measures against increasing cyber-attacks.

More Information...

Latest News from

Infineon simplifies speed measuring sensor designs
Infineon: smart power switches with PROFET+2 and High Current PROFET
Infineon: preventing cyber-attacks in rescue services
Infineon starts volume production of first full-SiC-module
Infineon: intelligent power module CIPOS Mini integrates power factor correction
Icon Labs partners with Infineon on PKI Management Solution for OPTIGA TPM
Infineon: flyback controller and integrated power IC CoolSET family

Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


ROHM explains their latest wireless battery charger solution kit

In this video an engineer from ROHM goes over their latest wireless power development kit, co-developed with Würth for embedded development. The kit provides a complete wireless power transfer sy...


Tektronix describes their latest mixed-signal oscilloscope

In this video Tektronix explains the features in their latest 5 Series MSO Mixed Signal Oscilloscope. Features include an innovative pinch-swipe-zoom touchscreen user interface, a large high-definitio...


AVX shows a supercapacitor demonstrator at APEC

In this video Eric from AVX explains their supercapacitor demonstrator box at APEC 2018 in San Antonio, Texas. The box shows how a 5V 2.5-farad supercapacitor can quickly charge up using harvested ene...


OnSemi explains their latest passive smart wireless sensor for industrial applications

In this video On Semiconductor explains their latest wireless sensor for hazardous environments at APEC in San Antonio, Texas. Intended for applications like high-voltage power cabinets and other plac...


TI demonstrates an improved gaming power system at Embedded World

In this video Texas Instruments' explains Significant reduction in ripple, which results in improved reliability and increased design margins, among other advantages. Another benefit that improve...


Infineon explains their latest motor drive technology at APEC 2018

In this video Infineon demonstrates new gate drivers using their LS-SOI technology at APEC 2018. In the demo Victorus, an Infineon application engineer, shows in real time how much better thermal the ...


STMicro goes over their latest wireless-enabled microcontroller for the IoT

In this video STMicroelectronics goes over their latest wireless-enabled STM32WB microcontroller for the IoT and intelligent devices in several live connectivity demonstrations at Embedded World 2018....


wholesale jerseys