F&S: WLAN/ BT and MIPI-DSI on 35 x 40mm only

The first member of the new and compact PicoCORE COM product family by F&S Elektronik Systeme is offered with the NXP i.MX 7ULP ARM based Applications Processor. Further pin compatible PicoCORE COMs will follow. NXP enables its heterogeneous concept with Linux running on the ARM® Cortex-A7 core and FreeRTOS running on the ARM Cortex-M4 core. The AP offers OpenGL ES 2.0, OpenVG 1.1 3D and 2D Graphics Accelerator for media applications. There are up to 1GB LPDDR3 RAM and up to 32GB eMMC, as well as USB OTG, 2x I2C, SPI, 2x UART and SDIO available.

The board comes with a MIPI-DSI interface for easy connection to displays. A resistive/ PCAP touch panel can be connected via I2C. Another option is an onboard WLAN/BT4.1 module (pre-certified). The PicoCORE™ standard uses two plug connectors (Hirose DF40C) with 80 pins each. This enables a compact shape and short board-to-board distance. The power supply of PicoCORE is 5V, the power consumption is about 1W.

The available operating system is Linux (kernel 4.1.15, Yocto); it has already been ported by the experienced software team of F&S Elektronik Systeme. Bootloader, customized interface drivers and all tools needed for development are ready to download.

Several security functions were made available by F&S‘s customized Linux OS. The F&S project guarantee accompanies the customer from the start until the successful finish of the project. Starter kits, workshops, hardware and software documentations, as well as free support by the experienced engineers pave the way to customers’ success. PicoCOREMX7ULP will be available until minimum 2028. PicoCOREMX7ULP will be introduced at Embedded World 2018.


ZES Zimmer on testing advanced power electronics

In this video Bernd Neuner from ZES Zimmer talks to Alix Paultre for Electronic News TV at the 2017 Power Electronics Conference in Nuremberg. The discussion deals with the issues involving test and m...


Weidmüller discusses the need for a better signal and power interface

In this video Rene Arntzen from Weidmüller talks to Alix Paultre of Electronic News TV about the importance of a good signal and power interface for industrial equipment. There is currently no good ...


Mouser talks about the state of engineering development today

In this video Mark Burr-Lonnon and Graham Maggs of Mouser Electronics, a major international electronics distributor, talk to Alix Paultre about the state of engineering development today. With massiv...


Infineon launches a new family of configurable industrial drive boards

In this video Infineon explains their new family of configurable industrial drive boards at SPS-IPC Drives 2017. Intended to enable easy setup and deployment, the XMC-based automation boards can handl...


STMicro explains their STSPIN family of single-chip motor drivers

In this video STMicroelectronics explains their STSPIN single-chip motor drivers at SPS-IPC Drives 2017. The STSPIN family embeds can drive motors efficiently and with high accuracy, with an advanced ...


wholesale jerseys