Laird: thermoelectric modules series for high temperature environments

Laird has expanded its thermoelectric module (TEM) product family to protect critical electronic devices in emerging applications found in high temperature environments. This typically occurs in outdoor environments where heat generated from surrounding electronics exceeds the temperature of sensitive electronics with maximum operating temperatures of 60~70°C. The HiTemp ET Series delivers spot cooling to ensure maximum temperature of device is not exceeded in ambient environments greater than its maximum operating temperature.

The HiTemp ET Series launch includes 53 models for engineers to choose from with a wide range of heat pumping capacities, geometric form factors and various input voltages to cover the wide range of applications Laird is gaining exposure to. Laird’s enhanced TEM construction prevents copper diffusion, which commonly occurs for standard grade TEMs in higher temperature environments and prevents degradation in their performance. The HiTemp construction also does not sacrifice performance for reliability like other high temperature modules on the market. The product series maintains a high coefficient of performance to allow for maximum heat rejection into air environment even with poor heat sinking.

Many sensitive devices, such as lasers and CMOS sensors, are designed into autonomous systems for collision avoidance in vehicles and drones. Digital light processors) are used in 3-D machine vision, advanced lighting systems and projectors that may also require cooling in outdoor environments where ambient temperatures exceed its maximum operating temperature condition.


Bs&T at PCIM2018

powerlosstester presenting BsT-pulse 3 phase version and BsT-SQ for powerloss measurement of inductive components new findings of tester, the highest Bs ferrite material D9B for SiC application GaN fe...


Würth and AnDAPT describe their new programmable power solution

In this video an engineer from AnDAPT describes their new programmable power solution and their partnership with Würth at the APEC exhibition  in San Antonio, Texas. Drawing from Würth&...


MAGMENT: Magnetizable concretes, sole enablers for dynamic inductive wireless charging.

MAGMENT is a patented material technology, engineered from cement and magnetic particles from recycled electronic waste. We are the inventors and sole company worldwide to offer both the concrete mate...


A look at Analog Devices' wireless power demonstration at APEC 2018

In this video Steve from Analog Devices walks us through a wireless power transmission demonstration at APEC 2018 in San Antonio, Texas. The LTC4120 is a constant-current/constant-voltage wireless rec...


Analog Devices talks about their Power over Ethernet solutions at APEC

In this video Analog Devices talks about their Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. Their LTC4291 provides four PSE Ports with two power channels per port, and is fully co...


Silicon Labs demonstrates their latest PoE solutions at APEC 2018

In this video John Wilson of Silicon Labs demonstrates their latest Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. The live demonstration shows how a remote device can effectively p...


Vitrek explains their advanced testing solutions at APEC 2018

In this video Vitrek explains their advanced testing solutions at APEC 2018 in San Antonio, Texas. The devices displayed includes their 4700 high-voltage meter, which can measure up to 10kV and can pe...


Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...



wholesale jerseys