Swissbit: USB 3.1 sticks for industrial use and secure

Swissbit announce the introduction of a new product range of USB 3.1 flash drives. The new USB sticks fulfill the tough requirements of flash memory for industrial use. The series is based on a highly sophisticated USB 3.1 flash controller and comprises the product range U-500k with a highly reliable SLC-NAND and U-50k with MLC-NAND. Furthermore, a version with MLC-NAND in pSLC configuration is offered under the name U-56k. The benefit: an endurance seven times longer than that of a MLC-NAND with the same memory density. By the third quarter of 2018, the SLC versions with densities of 2 to 32 GB, the MLC version with 16 to 128 GB and the pSLC configuration with 8 to 64 GB will be available. Particularly important considering the new stricter data protection provisions: all USB 3.1 sticks are also offered in versions with integrated data protection features.

USB flash drives are often used to transport data between different locations or as exchangeable memory expansion in industrial applications such as log data storage, data backup, system upgrade or as license token. Now Swissbit offers new USB stick ranges that fulfill the same requirements for professional applications as other industrial storage solutions yet are extremely easy to use and universally applicable.

In combination with the SuperSpeed USB 3.1 interface, U-500k, U-50k and U 56k offer outstanding data rates for the sequential writing of data. As the firmware works with page-based mapping, the random-write IOPS performance increases, while wear decreases significantly. This in turn makes USB sticks the perfect solution for data logging applications. Smart firmware routines recognize weak data segments and update them before any data loss occurs. This is particularly important when used as boot medium or for long-term data storage.

Swissbit will offer special variants of these USB sticks for confidential or license-relevant content under the names PU-500k, PU-50k and PU-56k. Configurable security options allow for data encryption and access restrictions with PIN protection including repeat counter and hidden or read-only partitions. The data protection option “DP” prevents data from being spied upon in case of loss or theft of a flash drive. Furthermore, the secured USB stick can also be employed as copy-protected license tokens.

For the new USB 3.1 product range, Swissbit AG once again has opted for their proven flash drive casing “unitedCONTRAST II”, already used for their USB 2.0 sticks, which is also available in customized designs. Additionally, Swissbit will add a “Nano” casing to their range - a robust flash drive in an enclosed tamper-proof metal casing.


Bs&T at PCIM2018

powerlosstester presenting BsT-pulse 3 phase version and BsT-SQ for powerloss measurement of inductive components new findings of tester, the highest Bs ferrite material D9B for SiC application GaN fe...


Würth and AnDAPT describe their new programmable power solution

In this video an engineer from AnDAPT describes their new programmable power solution and their partnership with Würth at the APEC exhibition  in San Antonio, Texas. Drawing from Würth&...


MAGMENT: Magnetizable concretes, sole enablers for dynamic inductive wireless charging.

MAGMENT is a patented material technology, engineered from cement and magnetic particles from recycled electronic waste. We are the inventors and sole company worldwide to offer both the concrete mate...


A look at Analog Devices' wireless power demonstration at APEC 2018

In this video Steve from Analog Devices walks us through a wireless power transmission demonstration at APEC 2018 in San Antonio, Texas. The LTC4120 is a constant-current/constant-voltage wireless rec...


Analog Devices talks about their Power over Ethernet solutions at APEC

In this video Analog Devices talks about their Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. Their LTC4291 provides four PSE Ports with two power channels per port, and is fully co...


Silicon Labs demonstrates their latest PoE solutions at APEC 2018

In this video John Wilson of Silicon Labs demonstrates their latest Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. The live demonstration shows how a remote device can effectively p...


Vitrek explains their advanced testing solutions at APEC 2018

In this video Vitrek explains their advanced testing solutions at APEC 2018 in San Antonio, Texas. The devices displayed includes their 4700 high-voltage meter, which can measure up to 10kV and can pe...


Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...



wholesale jerseys