Teledyne LeCroy: WaveRunner 9000 oscilloscope offers large display, powerful toolbox

Teledyne LeCroy introduced its WaveRunner 9000 Series mixed-signal oscilloscopes with a large, 15.4” display, bandwidths from 500 MHz to 4 GHz, and sample rates up to 40 GS/s. The WaveRunner 9000 Series offers the industry’s deepest toolbox and the most complete collection of serial data debug and validation solutions, making it ideal for embedded system, automotive, and EMC/EMI test applications.

The ubiquity of embedded computing systems with high-speed microprocessors drives industry demand for mid-range, mixed-signal oscilloscopes with high bandwidth and powerful debug and validation toolsets. However, equipment budgets have not kept pace with the increase in microprocessor speed and complexity. This has forced engineers and managers to sacrifice certain capabilities in their test equipment. Teledyne LeCroy’s WaveRunner 9000 oscilloscopes offers all of the critical features—a large display, powerful toolbox, wide range of bandwidths, and enhanced resolution up to 11 bits—at an affordable price.

The WaveRunner 9000 offers a huge array of test, debug, and validation tools, making it well suited for comprehensive testing of embedded computing systems. The widest selection of serial data triggering and decode (TD) packages provides powerful, flexible serial triggering with an intuitive color-coded decode overlay. Additionally, unique measure/graph and eye-diagram test (TDME) packages complement the TD packages by enabling extraction of decoded data and subsequent waveform data plots, performing bus timing measurements, and creating eye diagrams for testing against standard or custom masks. This set of tools provides exhaustive causal analysis for not only embedded systems but also automotive applications, covering all aspects of Automotive Ethernet validation and debug, including 1000Base-T1 and 100Base-T1 compliance test.

WaveRunner 9000 oscilloscopes have standard capability to provide improved resolution with bandwidth tradeoffs by means of filtering, and each channel can be filtered independently. The filtered result shows the improvement in the number of effective bits at a given bandwidth. For EMC/EMI compatibility applications, WaveRunner 9000 accurately characterizes EMC test signals with a 40 GS/s sampling rate and 1% gain accuracy. The WaveRunner 9000’s spectral analysis mode pins down high harmonic peaks across a wide EMC band using an interactive peaks and markers table. In addition, a dedicated EMC pulse parameter measurement package enables the user to tailor measurements to specific EMC/ESD standards.

nVent Schroff at Embedded World 2019

The theme of the nVent Schroff booth at Embedded World 2019 was “Experience Expertise – Modularity, Performance, Protection and Design”. Join us as our experts give an overview of th...


Garz & Fricke Interview at Embedded World 2019 with Dr. Arne Dethlefs: We are strengthening our presence in North America

Through its US subsidiary, located in Minnesota, Garz & Fricke is providing support for its growing HMI and Panel-PC business in the USA and Canada while also strengthening its presence in North A...


SECO's innovations at embedded world 2019

In a much larger stand than in previous years, at embedded world 2019 SECO showcases its wide range of solutions and services for the industrial domain and IoT. Among the main innovations, in this vid...


Design and Manufacturing Services at Portwell

Since about two years Portwell is part of the Posiflex Group. Together with KIOSK, the US market leader in KIOSK systems, the Posiflex Group is a strong player in the Retail, KIOSK and Embedded market...


Arrow capabilities in design support

Florian Freund, Engineering Director DACH at Arrow Electronics talks us through Arrow’s transformation from distributor to Technology Platform Provider and how Arrow is positioned in both, Custo...


Arm launches PSA Certified to improve trust in IoT security

Arm’s Platform Security Architecture (PSA) has taken a step forward with the launch of PSA Certified, a scheme where independent labs will verify that IoT devices have the right level of securit...


DIN-Rail Embedded Computers from MEN Mikro

The DIN-Rail system from MEN is a selection of individual pre-fabricated modules that can variably combine features as required for a range of embedded Rail Onboard and Rail Wayside applications. The ...


Embedded Graphics Accelerates AI at the Edge

The adoption of graphics in embedded and AI applications are growing exponentially. While graphics are widely available in the market, product lifecycle, custom change and harsh operating environments...


ADLINK Optimizes Edge AI with Heterogeneous Computing Platforms

With increasing complexity of applications, no single type of computing core can fulfill all application requirements. To optimize AI performance at the edge, an optimized solution will often employ a...


Synchronized Debugging of Multi-Target Systems

The UDE Multi-Target Debug Solution from PLS provides synchronous debugging of AURIX multi-chip systems. A special adapter handles the communication between two MCUs and the UAD3+ access device and pr...


Smart Panel Fulfills Application Needs with Flexibility

To meet all requirement of vertical applications, ADLINK’s Smart Panel is engineered for flexible configuration and expansion to reduce R&D time and effort and accelerate time to market. The...


Artificial Intelligence

Morten Kreiberg-Block, Director of Supplier & Technology Marketing EMEA at Arrow Electronics talks about the power of AI and enabling platforms. Morten shares some examples of traditional designin...


Arrow’s IoT Technology Platform – Sensor to Sunset

Andrew Bickley, Director IoT EMEA at Arrow Electronics talks about challenges in the IoT world and how Arrow is facing those through the Sensor to Sunset approach. Over the lifecycle of the connected ...


AAEON – Spreading Intelligence in the connected World

AAEON is moving from creating the simple hardware to creating the great solutions within Artificial Intelligence and IoT. AAEON is offering the new solutions for emerging markets, like robotics, drone...


Arrow as a Technology Provider drive Solutions selling approach

Amir Sherman, Director of Engineering Solutions & Embedded Technology at Arrow Electronics talks about the transition started couple of years ago from a components’ distributor to Technology...


Riding the Technology wave

David Spragg, VP, Engineering – EMEA at Arrow Electronics talks about improvements in software and hardware enabling to utilize the AI capabilities. David shares how Arrow with its solutions is ...


ASIC Design Services explains their Core Deep Learning framework for FPGA design

In this video Robert Green from ASIC Design Services describes their Core Deep Learning (CDL) framework for FPGA design at electronica 2018 in Munich, Germany. CDL technology accelerates Convolutional...


Microchip explains some of their latest smart home and facility solutions

In this video Caesar from Microchip talks about the company's latest smart home solutions at electronica 2018 in Munich, Germany. One demonstrator shown highlights the convenience and functionalit...


Infineon explains their latest CoolGaN devices at electronica 2018

In this video Infineon talks about their new CoolGaN 600 V e-mode HEMTs and GaN EiceDRIVER ICs, offering a higher power density enabling smaller and lighter designs, lower overall system cost. The nor...


Analog Devices demonstrates a novel high-efficiency charge pump with hybrid tech

In this video Frederik Dostal from Analog Devices explains a very high-efficiency charge-pump demonstration at their boot at electronica 2018 in Munich, Germany. Able to achieve an operating efficienc...


wholesale jerseys