AAEON enters 4K realm with EPIC-BDU7

AAEON unveils the most advanced entry in their EPIC form factor board lineup, the EPIC-BDU7 that comes with Intel’s 5th Generation Core processors, delivering high performance at a very low powe...

Toshiba expands line-up of ARM Cortex -M-based MCUs

Toshiba Electronics Europe will enhance its portfolio of ARM Cortex-based microcontrollers with the development of the new TXZ family of microcontrollers that support low-power consumption and high-sp...





Lattice expands USB Type-C USB port controllers

Lattice Semiconductor announced the expansion of its USB Type-C product family with the introduction of its latest SiI7012, SiI7013 and SiI7014 port controllers. Port controllers are used to configure...

EKF: SAS/SATA host controller XMC mezzanine module

EKF unveils the DS1-LEOPARD, a SAS/SATA host controller XMC mezzanine module. The Mini SAS 4x connector is suitable for attachment of up to four external SAS or SATA storage devices, such as hard disk...


Rapid evaluation and development of low voltage three phase motor and motion control systems

This Webinar will explore TI’s InstaSPIN three phase motor control solutions and in particular the low cost LaunchPad (controller) and BoosterPack (inverter) ecosystem. Using these tools sensorless torque or velocity and encoder based sensored velocity or servo position control applications can be evaluated and developed using your own three-phase motor.


Conrad: PLCs based on ARDUINO

Conrad Business Supplies has introduced a range of new, highly flexible and customisable programmable logic controllers exclusively from CONTROLLINO. These new products are suited to a variety of auto...

Acceed: mobile Box PC features 16 PoE ports

The new fanless and highly compact Box PC Nuvo-3616 from Acceed is equally suited for mobile applications and fixed industrial installations. It is distinguished by its 16 Ethernet PoE ports with a to...

ams offers more than silicon in optoelectronics

The Full Service Foundry division of ams is extending its 0.35µm CMOS optoelectronics IC foundry platform to offer chip designers greater sensitivity and precision and more light filtering capab...

Atmel: 2-pin, self-powered serial EEPROM

Atmel launched an innovative Single-Wire EEPROM with only two-pins—a data pin and ground pin for operation—making the new family ideal for the Internet of Things, wearables, consumable, ba...

Amplicon announce Impact-D 100 DIN Rail PC

The new Amplicon Impact-D 100 has been designed and manufactured in the UK to the highest standards. Designed to be compact, rich in I/O and running the latest quad core ATOM processor, the Intel ATOM...


Featured Videos


Presenting the IoT Quick Start Kit „PingPong“

Ben Hoelke, CEO at Round Solutions talks about the very easy and cost effective way to bring new IoT products to market. The Round Solutions PingPong is an embedded IoT/M2M hardware platform made for ...


The big role of security in networked devices

A discussion about how security concerns can put networked embedded IoT devices at risk. All embedded developers now have to think about the implication of security on their networked devices. Dave Hu...


Small HMIs in the IoT age

Markus Mahl speaks in this interview about Data Modul’s Embedded SBC with a lot of interfaces and in a very small format. The eDM-pITX-BT is based on the new Intel® Atom™ processors an...


The success of IOT depends on the solution of 3 key challenges

Security: IOT needs to be 100% secure out of the box without complex network setup and without gateways and VPN's Power consumption: billions of devices will not be possible at a power consum...


Ultra-low power wireless microcontroller platform for the IoT

At embedded world Greg Delagi, senior vice president Embedded Processing at Texas Instruments, talks about developments of the IoT in the market and how Texas Instruments is positioned. He elaborat...


Ready for success: Find the right solution

TQ presents a large number of new products and solutions at the embedded world 2015. Besides new power architecture and x86 and ARM modules, the Internet of Things is a focal point this year. Wolfgang...


Full Coverage of Modules and Boards Fulfills Your Industrial Needs

With the Computer-On-Module approach, all generic PC functions are readily available in an off-the-shelf core module. A custom designed carrier board complements the COM with additional functionality ...


A Industrial Cloud Solution to Manage, Control and Configure Your Devices

Downtime of devices or systems is not acceptable in today’s industries. To help customers to analyze their systems and take counter measures for preventive maintenance, ADLINK has developed a to...


Intelligent IoT Solution: Machine Failure Prediction

Industrial machinery is subject to nearly constant shock and vibration, which generates fatigue and wear on materials and components. Imprecision and eventually system failure result. Forecasting pote...