CML: full featured AFE for DSP/FPGA/microcontroller based systems

The CMX7861 ‘FirmCODEC’ is a full featured analogue front end for DSP/FPGA/Microcontroller based systems. The device is a combination of codec, embedded signal processing and auxiliary system support functions, allowing simple interfacing between analogue and digital systems that together improve overall system performance, reduce development time and overall system cost. Modern-day electronic systems, notably communication, control and monitoring are increasingly migrating to digital operations, an area dominated by DSP/FPGA/Microcontroller signal processing. However, the real world is essentially analogue, making analogue to digital and digital to analogue interfaces a crucial part of the overall design. FirmCODEC provides this solution.

The device is intended for use in a number of applications including radio systems performing the main data conversion and auxiliary operations for monitoring and control, operating in channel bandwidths up to 50kHz and interfacing RF devices to baseband DSP/FPGA/microcontroller. Single-ended and differential interface options are provided and I/Q-based operation is supported. Fully-programmable on-chip independent dual channel, digital channel filters can be utilised for signal conditioning purposes. An Intelligent four-channel SAR ADC, 4 independent DACs and GPIO sub-systems perform valuable functions and minimise host interaction and resources. Two synthesised system clock generators develop clock signals for off-chip use. The C-BUS/SPI master interface expands host C-BUS/SPI ports to control external devices.

Two general modes of operation are supported: codec mode and modem mode. Codec mode is intended for applications where a general purpose codec is required. When in codec mode, the CMX7861 will provide digital-to-analogue and analogue-to-digital conversion, and a front end intelligent codec for the DSP/FPGA/Microcontroller. Modem mode is suited to applications where the CMX7861 is used to transmit and receive modulated data. Modem mode provides a transmit signal interpolator which will aid in the modulation process by converting mapped symbols to a filtered, modulated output.  Receive channel filters are also provided.

The CMX7861 utilises CML’s proprietary FirmASIC component technology that enables on-chip sub-systems to be configured by a Function Image data file, which is uploaded during device initialisation and defines the device's function and feature set. The Function Image can be loaded automatically from a host microcontroller over the C-BUS serial interface or from an external memory device. The device's functions and features can be enhanced by subsequent Function Image releases, facilitating in-the-field upgrades. The CMX7861 operates from a 3.3V supply and includes selectable power-saving modes. It is available in a 64-VQFN package.


 
 

VIRTUAL EVENTS



Avionics Virtual Seminar
The Avionics industry continues to invest into new technologies not only to save costs, but also to increase capacity and to improve traffic flow and safety in the sky. This Virtual Seminar provides you with 6 technical webinars about developing high-rel, safe and secure software and hardware for Avionics systems.

Leveraging continuous real-time automation data as a business asset
Learn how Equipment Manufacturers and plant managers can break through the real-time wall between IT business systems and operational plant control systems to gain a competitive edge in manufacturing or production.

Lighting solutions
This virtual event about Lighting introduces advantages of low- and mid-power LEDs, demonstrates how technological problems of mixed LED systems can be solved by sensors with feedback control, describes how to realize a complex lighting solution with modern MCUs and introduces a light laboratory.

How to accelerate your design and reduce risk with COTS components
This webinar will give an overview of Freescale's QorIQ platforms, a highly integrated architecture including multiple cores, accelerators, security and more, along with TQ's modular COTS solutions for this advanced multicore architecture.

Microcontrollers & Tools
Traditionally Spring is high season for new product announcements in the market for microcontrollers and development tools. Therefore this free virtual conference provides you with webinars and videos about major new products and technologies which have been introduced just recently.


ARM® core-based solutions from Texas Instruments
 In this Virtual Conference TI provides overview and outlook about its ARM-based Microprocessors, Microcontrollers and SoCs product range.

Smart Metering Virtual Seminar
Smart Meters save energy and improve efficiency. The market for smart meters is projected to grow rapidly in the next couple of years. Our Virtual Seminar about Smart Metering provides you 4 free webinars presented by Silica, Texas Instruments, NXP and TÜV Süd.

Industrial Computing & Communications
The 2012 version of our Virtual Conference Industrial Computing & Communications provides an update about latest trends, solutions and products to create reliable communications within industrial environments. Major topics are Chips & Solutions for Industrial Ethernet and Boards, Modules & Systems for Industrial Applications.

Embedded Wireless
Wireless technologies are expected to be implemented in more and more applications - from personal and medical devices, to transportation and industrial and many more. This free Virtual Conference has its focus on products, technologies, and applications in the Embedded Wireless arena.