Curtiss-Wright announces the availability of a higher performance, faster version of its ADC510 FPGA Mezzanine Card module. The ADC510 now supports two Texas Instruments ADS54RF63 ADC devices with each device supporting a sampling rate up to 550 MSPS and providing 12-bits of digital output. The ADC device interfaces are routed to the FMC connector to enable an FPGA on a baseboard to directly control and receive data. There is a choice of sample clock sources for the ADC510 including an onboard source that supports sampling rates of 300, 320, 400, and 500 MSPS as well as the ability to utilize an external sample clock. Input and output triggers are provided to enable multiple ADC510 modules to be synchronized to increase the number of input channels. It complements Curtiss-Wright Controls’ family of high-speed ADC FMC cards, including the recently announced ADC512, FMC-520 and FMC-XCLK2 providing a complete ADC/DAC solution for DSP applications.
FMCs address the needs of FPGA centric I/O by enabling I/O devices that reside on an industry standard mezzanine card to be attached to, and directly controlled by, FPGAs that reside on a baseboard. An FMC module is about half the size of a PMC mezzanine module. To maximize data throughput and minimize latency, the FMC connector has many pins that support high-speed signals for moving data between the FMC and an FPGA on the baseboard. FMCs are ideal for high speed analog I/O, digital I/O, fiber-optics, memory or even a DSP co-processor.
Wolfgang Patelay, Editor Print & Online 